The Yeti Roadie 24 has no built-in cup holders; add-on mounts solve it.
If you love your Roadie 24, a yeti roadie 24 cup holder takes it from good to great. I test coolers and camp gear for a living. I’ve tried lid trays, side clamps, and boat-ready mounts. In this guide, I break down every smart way to add a yeti roadie 24 cup holder so your drinks stay safe, cold, and close.
Key facts you should know before buying a yeti roadie 24 cup holder
The Roadie 24 is a compact, rotomolded hard cooler with a tall interior. It fits wine bottles upright and holds ice well. But it does not include molded cup holders on the lid.
You can still add a yeti roadie 24 cup holder with simple accessories. Your best options clip to the side handle, slide into the tie-down slots, or sit on top of the lid. Most installs are tool-free and do not need drilling. I prefer no-drill mounts since they protect the cooler’s shell and warranty.
Important notes from hands-on use:
- The lid has a strong gasket. Avoid thick trays that stop it from sealing.
- The cooler has no drain plug. Tilting to pour meltwater is normal. Keep side-mounted holders clear so you can tilt.
- Tie-down slots are ideal anchor points. They keep a yeti roadie 24 cup holder stable on boats and trucks.
A yeti roadie 24 cup holder should handle 12 to 30 oz tumblers. It should also manage cans with koozies. Look for marine-grade coatings, stainless hardware, and grippy liners. These details matter in the sun, sand, and salt.
Types of yeti roadie 24 cup holder solutions
You have five main styles. Each style has trade-offs. Pick the one that fits how you camp, fish, or tailgate.
Lid-top trays and mats
- What they are: Flat trays or mats with cup cutouts. They sit on the lid.
- Pros: Zero install. Moves fast between spots. Great at tailgates.
- Cons: Can slide if wet unless it has rubber feet. Not ideal while walking.
- Best for: Parking-lot hangs, backyard BBQs, and picnic tables.
Side-mount clamp holders
- What they are: Clamp-on cups that grab the side handle or lip.
- Pros: No tools. Keeps drinks off the lid so you can open it.
- Cons: Clamp must match the handle shape. Check for rubber pads.
- Best for: Campsites, parks, and short moves.
Tie-down slot brackets
- What they are: Brackets that slide into the cooler’s tie-down slots.
- Pros: Very secure. Great for boats and off-road.
- Cons: Slightly slower to move. Measure slot sizes first.
- Best for: Marine use, truck beds, and UTVs.
MOLLE-style pouches
- What they are: Soft holders with straps or webbing.
- Pros: Light, quiet, and flexible. Packs away flat.
- Cons: Less rigid. Not ideal for tall bottles in heavy chop.
- Best for: Hikes from car to beach and family park days.
Rail or rod-holder adapters for boats
- What they are: Cup holders that attach to a rail or fit a fishing rod holder.
- Pros: Super stable underway. Keeps deck space clear.
- Cons: Needs compatible rail or rod holder.
- Best for: Skiffs, pontoons, and kayaks.
If you tailgate often, a lid-top tray is easy. If you boat, the tie-down bracket is king. For daily versatility, I like side clamps. Any of these can serve as your yeti roadie 24 cup holder with the right fit and pads.
Compatibility and fit: what actually works
Getting the fit right makes your yeti roadie 24 cup holder feel like it came with the cooler.
What to check:
- Cup diameter: Look for 2.75 to 3.5 inches. That fits cans, bottles, and most tumblers.
- Depth: At least 2.25 inches keeps tall drinks upright.
- Padding: Rubber or EVA liners reduce rattles and scratches.
- Mount clearance: Do not block the latch path or lid hinge.
- Handle swing: Keep the HeftyHauler handle free so you can carry the cooler.
Drink types that work best:
- 12 oz cans with or without sleeves
- 16 oz tallboys
- 20–30 oz tumblers with lids
- 18–26 oz bottles with narrow bases
Avoid extra-wide bottles unless the holder lists a max diameter that fits. When in doubt, measure your favorite cup base and compare. This one-minute check prevents surprises. It also helps you pick the right yeti roadie 24 cup holder the first time.
How to install a yeti roadie 24 cup holder without tools
You can mount most options in minutes. Here is the simple approach I use with clients.
For side-mount clamp holders:
- Wipe the handle or side lip dry.
- Open the clamp and seat the rubber pad flat.
- Tighten until snug. Do not over-torque. Wiggle test for play.
For tie-down slot brackets:
- Slide the bracket tongue into the slot.
- Align the cup ring where you want it.
- Lock with the included pin or knob. Check lid clearance.
For lid-top trays:
- Dry the lid.
- Set the tray so cutouts face the side you stand on.
- Add anti-slip dots if the tray did not include them.
For MOLLE-style holders:
- Wrap the straps around the handle post or tie-down bar.
- Weave and tighten the straps.
- Test with a full cup and adjust height.
Pro tip: Do a “bump test.” Tap the cooler sides and lift the handle fast. If the cup holder stays silent and steady, you are good. If it rattles, tighten or add a thin rubber shim. This makes your yeti roadie 24 cup holder feel solid on any surface.
Field-tested picks and real-world tips
I rotate between three yeti roadie 24 cup holder setups based on the day.
- Weeknight park dinners: I use a lid-top tray with two cup cutouts and a phone slot. It keeps spills down. Kids can grab drinks without opening the cooler.
- Beach days: A side clamp with a deep ring and drain slots. Sand rinses out fast. It holds a 20 oz tumbler tight, even when the wind kicks up.
- Boat days: A tie-down slot bracket. It stays locked while we cruise. No clanks, no spills.
What I learned the hard way:
- Shiny metal looks great but gets hot in the sun. Matte or coated finishes are nicer to touch.
- A lip on the cup ring helps with sweating tumblers.
- A tiny leash or retainer loop saves lids at the ramp.
- Do not block the latch path. It seems fine until you rush and slam a lid into it.
If you want one do-it-all yeti roadie 24 cup holder, get a deep, rubber-lined ring with a clamp or tie-down bracket. It will cover 90% of your use cases.
Maintenance, safety, and care
A little care keeps your yeti roadie 24 cup holder in top shape.
- Rinse with fresh water after salt or sand exposure.
- Dry before storage to stop rust on hardware.
- Check clamps and brackets each trip. Tighten if needed.
- Add food-grade silicone to rubber pads if they squeak.
- Store trays flat so they do not warp in heat.
Safety notes:
- Do not stand on a tray. The lid is strong, but trays are not steps.
- Keep holders away from walk paths to avoid hip bumps.
- Watch for sharp edges. File or cover them with tubing if needed.
These small habits extend the life of your yeti roadie 24 cup holder and protect the cooler’s shell.
Buying checklist and price ranges
Use this quick list to pick the right yeti roadie 24 cup holder the first time.
What to look for:
- Confirmed Roadie 24 compatibility
- No-drill install
- Stainless or coated hardware
- Rubber or EVA liners
- Drain slots for rain and meltwater
- Deep cup ring and lip
- Real-world weight rating listed
- Warranty or return window
Typical price ranges:
- Lid-top trays: budget to mid
- Side-mount clamps: mid
- Tie-down brackets: mid to premium
- MOLLE soft holders: budget
- Boat rail adapters: mid to premium
Spend where it counts. A strong mount and good liner matter more than fancy logos. That is how you get a yeti roadie 24 cup holder that lasts seasons, not weeks.
Frequently Asked Questions of yeti roadie 24 cup holder
Does the Roadie 24 have built-in cup holders?
No. The Yeti Roadie 24 does not include molded cup holders on the lid. You need an add-on yeti roadie 24 cup holder to hold drinks.
Will a 30 oz tumbler fit in most holders?
Often yes, but check diameter. Many holders fit 2.75 to 3.5 inches. Measure your tumbler base and match it to the yeti roadie 24 cup holder spec.
Can I install a holder without drilling?
Yes. Most options use clamps, straps, or tie-down slots. A no-drill yeti roadie 24 cup holder protects your cooler and installs fast.
Which style is best for boats?
Tie-down slot brackets or rail-mount adapters. They resist waves and vibration and keep cups secure underway.
Will a cup holder block the lid or latches?
It should not if placed right. Mount away from latch paths and hinge areas, then do a quick open-close test.
How do I stop rattles on rough roads?
Use rubber liners and tighten clamps. A thin rubber shim or a drop of silicone helps quiet metal-on-plastic contact.
Are metal cup holders safe in the sun?
They work, but they can get hot. Coated or matte finishes stay cooler and feel better to the touch.
Conclusion
A smart yeti roadie 24 cup holder turns a great cooler into a smooth basecamp. Pick the style that matches how you roll. Install it clean, test the fit, and keep it tight. Small choices like liners, depth, and mounting point make a big difference.
Ready to upgrade your setup? Use the checklist above, measure your favorite cup, and choose the holder that fits your life. Want more gear tips like this? Subscribe for field-tested guides, and drop a comment with your own Roadie 24 hacks.